Search found 22 matches
- Fri Jul 01, 2016 6:08 pm
- Forum: Digital Design
- Topic: What is difference between normal PLL and Deskew pll???
- Replies: 2
- Views: 33337
What is difference between normal PLL and Deskew pll???
What is difference between normal PLL and Deskew pll???
- Wed Jun 01, 2016 4:10 pm
- Forum: Synthesis & Timing
- Topic: Different Timing terminologies
- Replies: 0
- Views: 29724
Different Timing terminologies
Typical Clock Generation Scenario:The oscillator is external to the chip and produces a low frequency (10-50 MHz typical) clock which is used as a reference clock by the on-chip PLL to generate a high-frequency low-jitter clock (200-800 MHz typical). This PLL clock is then fed to a clock divider log...
- Wed Jun 01, 2016 3:27 pm
- Forum: Design For Testing (DFT)
- Topic: set input_delay and set output_delay
- Replies: 0
- Views: 15001
set input_delay and set output_delay
Why we need to set input_delay and set output_delay in our sdc's? How will we decide these numbers at block level and top design level?
- Mon May 09, 2016 3:15 pm
- Forum: Design For Testing (DFT)
- Topic: Pattern Inflation
- Replies: 2
- Views: 12545
Re: Pattern Inflation
Thanks Vikram .. your post is really informative.
- Fri Dec 11, 2015 4:52 pm
- Forum: Design For Testing (DFT)
- Topic: How Sequential Depth helps to Improve Test coverage ?
- Replies: 2
- Views: 15145
Re: How Sequential Depth helps to Improve Test coverage ?
Hi Vikram, May be you know as sequential depth is related to capture ( Launc on capture if atspeed), when we want to capture value related to input of non-scannable flop we need extra clock pulse so by increasing seuential depth as 2 you can capture response of that non-scan flop via scanable flop h...
- Mon Nov 30, 2015 3:10 pm
- Forum: Design For Testing (DFT)
- Topic: IDDQ Testing Basics
- Replies: 2
- Views: 11590
Re: IDDQ Testing Basics
Hi Vikram,
You are right IDDQ fault testing is for faults which are not detected by stuckat fault type. It is like top-up patterns. Also, Bridging faults and punch trough faults can be detected by these patterns.So, we use IDDQ patterns for additional fault coverage.
Regards,
Renu
You are right IDDQ fault testing is for faults which are not detected by stuckat fault type. It is like top-up patterns. Also, Bridging faults and punch trough faults can be detected by these patterns.So, we use IDDQ patterns for additional fault coverage.
Regards,
Renu
- Mon Nov 30, 2015 3:03 pm
- Forum: Design For Testing (DFT)
- Topic: Test procedure file used for EDT and ATPG
- Replies: 2
- Views: 12152
Re: Test procedure file used for EDT and ATPG
Hi Vikaram, Test Procedure file will be mostly same for EDT(Decompressor-Compression) Insertion and for ATPG (Pattern generation) except for additional EDT constraints. For example : EDT_UPDATE,EDT_CLOCK and other EDT related constraints. Dofile will also have additional constraints with compression...
- Tue Nov 17, 2015 4:52 pm
- Forum: Design For Testing (DFT)
- Topic: IDDQ Testing Basics
- Replies: 2
- Views: 11590
IDDQ Testing Basics
IDDQ testing is based on the principle that complimentary CMOS does not draw any current from the power supply when it's inputs are static (i.e. not switching). In reality, however, there exists a small leakage current which typically is orders of magnitude smaller than the switching current. By thi...
- Tue Oct 13, 2015 4:34 pm
- Forum: Design For Testing (DFT)
- Topic: HOW SCAN WORKS???
- Replies: 0
- Views: 14844
- Fri Dec 19, 2014 4:49 pm
- Forum: Design For Testing (DFT)
- Topic: Stitching of positive & negative flops in a scan chain?
- Replies: 1
- Views: 12081
Stitching of positive & negative flops in a scan chain?
Why we don't stitch positive edge flops then negative edge flops in a scan chain ?