Fedora electronic lab-VLSI CAD tools-open source

Post downloads here. Please don't upload/request for crack version.
Post Reply
bprasad2005
Posts: 35
Joined: Tue Apr 08, 2014 5:13 pm
Location: kurukshetra
Contact:

Fedora electronic lab-VLSI CAD tools-open source

Post by bprasad2005 »

Complete solution to your VLSI design tool needsThat too free of cost with OS

Fedora's Electronic Laboratory, an opensource hardware design and simulation platform, is dedicated to support the innovation and development brought by opensource Electronic Design Automation (EDA) community.

Fedora Electronic Laboratory provides a complete electronic laboratory setup with reliable open source design tools in order to help you keep in pace with current technological race. It reduces the risk assessment of open source hardware development and enable electronic designers tapeout quickly and efficiently.

Fedora Electronic Lab targets mainly the Micro-Nano Electronic Engineering field. It introduces:

A collection of Perl modules to extend Verilog and VHDL support.
Tools for Application-Specific Integrated Circuit (ASIC) Design Flow process.
Extra standard cell libraries supporting a feature size of 0.13µm. (more than 300 MB)
Extracted spice decks which can be simulated with gnucap/ngspice or any spice simulators.
Interoperability between various packages in order to achieve different design flows.
Tools for embedded design and to provide support for ARM as a secondary architecture in Fedora.
Tool set for Openmoko development and other open source hardware communities.
A peer review eeb-based solution coupled with an Eclipse IDE for Embedded/Digital Hardware IP design.
PLA tools, C-based design methodologies, simulators for 8051 and 8085 microcontrollers and many more. for more details go to http://spins.fedoraproject.org/fel/#about
and down load the software from http://torrent.fedoraproject.org/torren ... 20.torrent or http://download.fedoraproject.org/pub/a ... 6-20-1.iso (for 32bit)
User avatar
deepak.dhiman55
Posts: 13
Joined: Wed Apr 09, 2014 8:52 pm
Location: Ambala City

Re: Fedora electronic lab-VLSI CAD tools-open source

Post by deepak.dhiman55 »

Hello Sir,
i would like to know whether this Software Strictly Required Fedora Linux Flavour Or It Can Also Run ON the Ubuntu ..Bcoz I`m Using Ubuntu And THis Setup Seems To Be 2.31GB in size And If I downloaded it and doesn`t work then it will be waste for me...thanks in advance and i`m Looking To hear from your side...
User avatar
Narveer
Posts: 59
Joined: Tue Apr 08, 2014 11:29 am
Location: Bangalore, INDIA

Re: Fedora electronic lab-VLSI CAD tools-open source

Post by Narveer »

You can use it as LiveDVD, LiveDVD can be downloaded either via http or torrent. A LiveDVD is an operating system that is executed upon boot, without installation on a hard drive. A desktop icon can be used to install the OS if wanted.

Click here to Download LiveDVD

Explore Fedora's possibilities
bprasad2005
Posts: 35
Joined: Tue Apr 08, 2014 5:13 pm
Location: kurukshetra
Contact:

Re: Fedora electronic lab-VLSI CAD tools-open source

Post by bprasad2005 »

I have downloaded it and had used it also.It is complete set with OS.You can instal it your hard disk also.In fact I have come across a few design engineers'who have installed it in their hd.If you want to run it from live cd you have to boot your system from DVD(it will be a bit slow)
User avatar
deepak.dhiman55
Posts: 13
Joined: Wed Apr 09, 2014 8:52 pm
Location: Ambala City

Re: Fedora electronic lab-VLSI CAD tools-open source

Post by deepak.dhiman55 »

Thanks A Lot Narveer Sir And Dr. B. Prasad Sir For Providing Crsytal Clear Information About THis CAD Tool...
Post Reply